Tabla2 C2 EC by Edmundo Cassis
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is manually set to 100.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 40.
Oscillators ranges timbre
Oscillators 2 range is 8'.
Noise timbre
Noise level is manually set to 223.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 137.32Hz (43) and is modulated by Mod Env.
Mod Env mod-matrix 3 modulation amount for low-pass filter cut-off frequency is 127.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 255.
Filter resonance is set to 73 and is modulated by Pressure.
Pressure mod-matrix 1 modulation amount for filter resonance is 25.
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±27 cents (137).
Oscillators drift level is manually set to 24. Drift rate is 22
Arpeggiator pitch
Arpeggiator rate is 170 bpm with a clock divider of 1/16 .
Arpeggiator gate is manually set to 19.
Arpeggiator mode is Up (0) over 2 octaves. Looping gate/velocity pattern is preset pattern 22.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is off. Effect 2 level is off. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.
Reverse Reverb fx
not yet complete
Delay fx
not yet complete
Pressure modulator
Controls VCF Resonance.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Resonance | 25 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 255 |
Note Vel modulator
Controls VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| menu | VCF Envelope Velocity Sensitivity | 128 | |
| menu | VCA Envelope Velocity Sensitivity | 128 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 32s (255) |
| VCA Envelope Sustain Level | 48% (124) |
| VCA Envelope Release Time | 1.09s (125) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 0 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 125 |
| VCA Envelope Attack Curve | 0 |
Mod Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Cut-off Frequency | 127 |
| name | value |
|---|---|
| Mod Envelope Attack Time | 0s (0) |
| Mod Envelope Decay Time | 0s (0) |
| Mod Envelope Sustain Level | 100% (255) |
| Mod Envelope Release Time | 0s (0) |
| Mod Envelope Trigger Mode | Key (0) |
| Mod Envelope Attack Curve | 0 |
| Mod Envelope Decay Curve | 0 |
| Mod Envelope Sustain Curve | 255 |
| Mod Envelope Attack Curve | 0 |